Steels Interior
Lothada, Rajkot, Gujarat
GST No. 24ADCFS4507R1ZP
TrustSEAL Verified
Call 0794254694692% Response Rate
SEND EMAIL
Product Details:
| Production Capacity | 3-6 ton/day |
| Power Consumption | Total 21.50 Hp |
| Machine Type | Semi Automatic |
| Job Thickness | 1-5mm |
| System Control | PLC with 7" Touch operated screen |
| Max Sheet Width | 400-600 mm |
| Machine Body Material | MS Sheet, Rod & Pipe |
| Material | MS |
| Phase | 3 Phase |
| Motor | Main motor 10 HP (2nos) ABB company |
| Speed | 2400/min |
| Surface Finish | Glossy / Matt/Satin/Hair line |
| Voltage | 380V-50HZ |
| Country of Origin | Made in India |
Product Details:
| Production Capacity | 1-3 ton/day |
| Power Consumption | Total 16.5 HP |
| Machine Type | Semi Automatic |
| Job Thickness | 1-5mm |
| System Control | PLC with 7" Touch operated screen |
| Max Sheet Width | 600x600mm |
| Machine Body Material | MS Sheet, Rod & Pipe |
| Material | MS |
| Phase | 3 Phase |
| Motor | Main motor 15 HP ABB company |
| Speed | 1800 RPM / min |
| Surface Finish | Glossy / Matt/Satin/Hair line |
| Voltage | 380V-50HZ |
| Country of Origin | Made in India |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Machine Capacity | Mass Production |
| Power | Total 11 HP |
| Automation Grade | Semi-automatic |
| Body Material | MS with powder coating |
| Main Motor | 5 HP (2nos) ABB company |
| Pipe Diameter | Minimum 8mm to Maximum 100mm |
| Size Range | Length 1500-6000mm |
| Voltage | 380v-50hz |
| Output Finish | Glossy, Mirror, Matt, Silver Satin, Hairline |
| Machine part | MS laser cutting plates, sheet metal parts, Pulley, rubber belt, rubber wheel, bearings, MS rod, Lin |
| Compound system | Solid compound system |
| Machine Dimension | L(1400)*W(1420)*H(1350) |
| Mechanical parts | Linear Rod & Block |
| Spindal Speed | 2400 RPM |
| Operational Approach | PLC |
| Polishing Consumable | Hemp wheel, nylon wheel, cloth wheel and flap wheel |
| Country of Origin | Made in India |
Additional Information:
Product Details:
| Capacity | upto 1 ton |
| Material | Mild Steel |
| Power Consumption | 27.50 HP |
| Automation Grade | Semi Automatic |
| Pipe Size | Dia: 8mm to 100mm |
| Phase | 3 Phase power consumption |
| Voltage | 380v-50hz |
| Finish | Glossy, Mirror, Matte, Silver Satin, Hairline, Brushing |
| Warranty | 6 Month warranty in mechanical parts |
| Spindal Speed | 2400 RPM |
| Machine Dimension | L(7200mm)*W(760mm)*H(1350) |
| Polishing Consumable | Hemp wheel, nylon wheel, cloth wheel and flap wheel |
| Suitable products | Straight round rod -bar, pipe |
| Processing Size | Dia 8-100mm, Length 1500-6000mm |
| Main motor | 5hp (5nos) ABB company |
| Mechanical parts | Linear Rod & Block |
| Operational Approach | PLC |
| Relevant Industry | Hardware, Kitchenware,Automobile, Extrusion |
| Machine part | MS laser cutting plates, sheet metal parts, Pulley, rubber belt, rubber wheel, bearings, MS rod |
| Country of Origin | Made in India |
Product Details:
| Machine Material | Mild Steel |
| Material | Mild Steel |
| Voltage | 380v-50hz |
| Relavant Industry | Hardware, Kitchenware,Automobile, Extrusion |
| Processing Size | Dia 8-100mm, Length 1500-6000mm |
| Machine Dimenstion | L(1400mm)*W(760mm)*H(1350mm) |
| Mechanical parts | Linear Rod & Block |
| Machine part | MS laser cutting plates, sheet metal parts, Pulley, rubber belt, rubber wheel, bearings, MS rod |
| Operational Approch | PLC |
| Polishing Consumable | Hemp wheel, nylon wheel, cloth wheel and flap wheel |
| Spindal Speed | 2400 RPM |
| Compound system | Solid compound system |
| Main motor | 5hp (1nos) ABB company |
| At present working at Industries | Hardware, Bath accessories, Kitchenware, Electronics |
| Suitable products | Straight round rod -bar, pipe |
| Country of Origin | Made in India |
Product Details:
| Production Capacity | 1-3 ton/day |
| Machine Type | Fully Automatic |
| System Control | PLC |
| Polishing Consumable | Hemp wheel, nylon wheel, cloth wheel and flap wheel |
| Buff Wheel Ply | 15mm*250mm*33mm |
| Voltage | 380V-50hz |
| Main Power | 61 HP |
| Operational approch | PLC |
| Machine Dimension | L(6700)*W(1800)*H(1650) |
| Spindle RPM | 2400/min. |
| Suitable Part Length | 700mm |
| Suitable Part width | 300mm |
| Suitable Part Thickness | 0.5mm-3mm |
| Country of Origin | Made in India |
Additional Information:
Product Details:
| Production Capacity | 1-3 ton/day |
| Machine Type | Fully Automatic |
| System Control | Delta PLC |
| Voltage | 380V-50hz |
| Suitable Part Length | 700mm |
| Machine Dimension | L(6700)*W(1800)*H(1650) |
| Polishing Consumable | Hemp wheel, nylon wheel, cloth wheel and flap wheel |
| Suitable Part Thickness | 0.5mm-3mm |
| Main Power | 61 HP |
| Suitable Part width | 300mm |
| Operational approch | PLC |
| Buff Wheel Ply | 15mm*250mm*33mm |
| Spindle RPM | 2400/min. |
| Country of Origin | Made in India |
Additional Information:
Product Details:
| Machine Type | Fully Automatic |
| Voltage | 380V-50HZ |
| Suitable Part Thickness | 0.5mm-3mm |
| Suitable Part width | 300mm |
| Suitable Part Length | 700mm |
| Main Power | 61 HP |
| Operational approch | Delta PLC |
| Polishing Consumable | Hemp wheel, nylon wheel, cloth wheel and flap wheel |
| Buff Wheel Ply | L(6700)*W(1800)*H(1650) |
| Spindle RPM | 2400/min. |
| Country of Origin | Made in India |
Additional Information:
Product Details:
| Power Supply | 16.5 HP |
| Voltage | 380v-50hz |
| Buff Wheel Ply | 15mmX250mmX33mm |
| Operational approch | PLC with 7 Inch HMI screen |
| Thickness | 1-80mm |
| Machine Dimenstion | L(1400)*W(1450)*H(1650) |
| Size of work table | 600x600mm |
| Polishing Consumable | Hemp wheel, nylon wheel, cloth wheel and flap wheel |
| Spindle RPM | 1800r/min. |
| Country of Origin | Made in India |
Product Details:
| Production Capacity | 1-3 ton/day |
| Machine Type | Fully Automatic |
| System Control | Delta PLC |
| Automation Grade | Fully-automatic |
| Suitable Part Length | 700mm |
| Buff Wheel Ply | 15mm*250mm*33mm |
| Machine Dimension | L(6700)*W(1800)*H(1650) |
| Polishing Consumable | Hemp wheel, nylon wheel, cloth wheel and flap wheel |
| Suitable Part width | 300mm |
| Operational approch | PLC |
| Voltage | 380V-50hz |
| Spindle RPM | 2400/min. |
| Main Power | 61 HP |
| Suitable Part Thickness | 0.5mm-3mm |
| Country of Origin | Made in India |
Product Details:
| Pneumatic company | Jenetic |
| Operational approch | PLC with 7 Inch HMI touch screen panel |
| Mechanical parts | Linear Rod & Block, Iron cast Arm, Nylon Inner Hex bar |
| Type movement | Pneumatic Up & Down |
| Max. Size of buffing wheel (Diameter) | 250mm |
| Oscillation speed | Oscillation is in work table not in Spindle |
| Installation | 3 Phase power connection require |
| Wear compensation system | Pneumatic |
| Power Supply | 21.5 Hp |
| Main motor | 10HP (2nos) ABB Company |
| Wheel shaft changing time | 1 Minute |
| Suitable products | Sheet metal, Flat part |
| Voltage | 380v-50hz |
| Output finishing | Dual side Mirror, Glossy, Matt |
| Sliding workbench | Rack with gear box |
| Spindle control to maintain constant pressure | Ampire control meter.Pressure will be controlled by Ampire control meter |
| Compound system | Solid compound system |
| Suitable metal | Stainless steel, Brass, Copper, Aluminium, MS, Copper |
| Relavant Industry | Hardware, Kitchenware,Automobile |
| At present working at Industries | Hardware, Bath accessories, Kitchenware |
| Polishing Consumable | Hemp wheel, nylon wheel, cloth wheel and flap wheel |
| Suitable Part Length | 150mm-300mm |
| Fixture | Toggle lock and Clamp |
| Machine part | MS laser cutting plates, sheet metal parts, Pulley, rubber belt, bearings, vice tools |
| Rated power | 16.03 Kwt |
| Spindle RPM | 2400/min. |
| Inside diameter of buffing wheel | Hex bar 32mm |
| Air Pressure | 3 to 4 bar |
| Machine Dimenstion | L(1400)*W(1450)*H(1650)mm |
| Country of Origin | Made in India |
Product Details:
| Power | 21.5 Hp |
| Automation Grade | Semi-automatic |
| Motor | 10HP (2nos) ABB Company |
| Fixture | Toggle lock and Clamp |
| Operational approch | PLC with 7 Inch HMI touch screen panel |
| Suitable metal | Stainless steel, Brass, Copper, Aluminium, MS, Copper |
| Max. Size of buffing wheel (Diameter) | 250mm |
| Inside diameter of buffing wheel | Hex bar 32mm |
| Machine part | MS laser cutting plates, sheet metal parts, Pulley, rubber belt, bearings, vice tools. |
| Wheel shaft changing time | 1 Minute |
| At present working at Industries | Hardware, Bath accessories, Kitchenware |
| Output finishing | Dual side Mirror, Glossy, Matt |
| Pneumatic company | Jenetic |
| Spindle RPM | 2400/min. |
| Sliding workbench | Rack with gear box |
| Installation | 3 Phase power connection require |
| Suitable products | Sheet metal, Flat part |
| Oscillation speed | Oscillation is in work table not in Spindle |
| Polishing Consumable | Hemp wheel, nylon wheel, cloth wheel and flap wheel |
| Suitable Part Length | 150mm-300mm |
| Wear compensation system | Pneumatic |
| Compound system | Solid compound system |
| Voltage | 380v-50hz |
| Rated power | 16.03 Kwt |
| Air Pressure | 3 to 4 bar |
| Mechanical parts | Linear Rod & Block, Iron cast Arm, Nylon Inner Hex bar |
| Relavant Industry | Hardware, Kitchenware,Automobile |
| Machine Dimenstion | L(1400)*W(1450)*H(1650)mm |
| Spindle control to maintain constant pressure | Ampire control meter.Pressure will be controlled by Ampire control meter |
| Type movement | Pneumatic Up & Down |
| Country of Origin | Made in India |
Product Details:
| Mechanical parts | Linear Rod & Block, Iron cast Arm, Nylon Inner Hex bar |
| Machine part | MS laser cutting plates, sheet metal parts, Pulley, rubber belt, bearings, vice tools. |
| Output finishing | Dual side Mirror, Glossy, Matt |
| At present working at Industries | Hardware, Bath accessories, Kitchenware |
| Rated power | 16.03 Kwt |
| Polishing Consumable | Hemp wheel, nylon wheel, cloth wheel and flap wheel |
| Oscillation speed | Oscillation is in work table not in Spindle |
| Spindle control to maintain constant pressure | Ampire control meter.Pressure will be controlled by Ampire control meter |
| Wheel shaft changing time | 1 Minute |
| Voltage | 380v-50hz |
| Power Supply | 21.5 Hp |
| Main motor | 10HP (2nos) ABB Company |
| Fixture | Toggle lock and Clamp |
| Air Pressure | 3 to 4 bar |
| Suitable Part Length | 150mm-300mm |
| Suitable products | Sheet metal, Flat part |
| Type movement | Pneumatic Up & Down |
| Pneumatic company | Jenetic |
| Relavant Industry | Hardware, Kitchenware,Automobile |
| Machine Dimenstion | L(1400)*W(1450)*H(1650)mm |
| Operational approch | PLC with 7 Inch HMI touch screen panel |
| Sliding workbench | Rack with gear box |
| Inside diameter of buffing wheel | Hex bar 32mm |
| Installation | 3 Phase power connection require |
| Suitable metal | Stainless steel, Brass, Copper, Aluminium, MS, Copper |
| Spindle RPM | 2400/min. |
| Max. Size of buffing wheel (Diameter) | 250mm |
| Wear compensation system | Pneumatic |
| Compound system | Solid compound system |
Additional Information:
Product Details:
| Production Capacity | 1-3 ton/day |
| Machine Type | Fully Automatic |
| Spindle RPM | 2400/min. |
| Polishing Consumable | Hemp wheel, nylon wheel, cloth wheel and flap wheel |
| Suitable Part Length | 700mm |
| Buff Wheel Ply | 15mm*250mm*33mm |
| Main Power | 61 HP |
| Suitable Part width | 300mm |
| Operational approch | Delta PLC |
| Voltage | 380V-50hz |
| Machine Dimension | L(6700)*W(1800)*H(1650) |
| Suitable Part Thickness | 0.5mm-3mm |
| Country of Origin | Made in India |
Additional Information:
Product Details:
| Production Capacity | 1-3 ton/day |
| Power Consumption | Total 16.5 HP |
| Machine Type | Semi Automatic |
| Job Thickness | 1-2 mm |
| System Control | PLC with 7" Touch operated screen |
| Max Sheet Width | 400-600 mm |
| Machine Body Material | MS Sheet, Rod & Pipe |
| Phase | 3 Phase |
| Motor | Main motor 15 HP ABB company |
| Speed | Spindle 1800 RPM/ Min |
| Voltage | 380V-50HZ |
| Weight | 1500 Kgs |
| Country of Origin | Made in India |
Product Details:
| Production Capacity | 3-6 ton/day |
| Power Consumption | Total 21.50 Hp |
| Machine Type | Semi Automatic |
| Job Thickness | 1-5mm |
| System Control | PLC with 7" Touch operated screen |
| Max Sheet Width | 400-600 mm |
| Machine Body Material | MS Sheet, Rod & Pipe |
| Material | MS |
| Phase | 3 Phase |
| Motor | Main motor 10 HP (2nos) ABB company |
| Speed | 2400/min |
| Surface Finish | Glossy/Matt/Satin/Hair line |
| Voltage | 380V-50HZ |
| Buff wheel ply | 15x250x33mm |
| Suitable Part Length | 150mm-300mm |
| Polishing Consumable | Hemp, Nylon, Cloth, Flap wheels |
| Operational Approach | PLC with 7 Inch Touch screen |
| Machine Dimension | L1400 x W1450 x H1650 |
| Country of Origin | Made in India |
Product Details:
| Production Capacity | 1-3 ton/day |
| Automation Grade | Fully-automatic |
| Motor | 15 hp (1nos) ABB company |
| Work table size | 600mmx1220mm |
| Voltage | 380v-50hz |
| Machine type | CNC |
| Servo Motor | 1.5 Kw (2nos) Yaskawa company |
| Penal | Delta PLC |
| Operating system | HMI touch operating screen |
| Polishing Consumable | Hemp wheel, nylon wheel, cloth wheel & flap wheel |
| Machine Dimensions | H(2000mm) x L(4100mm)x W(1800mm) |
| Country of Origin | Made in India |
Product Details:
| Production Capacity | 6-10 ton/day |
| Power Consumption | 16.5 HP |
| Machine Type | Semi Automatic |
| System Control | PLC with Touch operated screen |
| Machine Body Material | MS Sheet, Rod & Pipe |
| Material | MS |
| Phase | 3 Phase |
| Motor | Main motor 15 HP ABB company |
| Speed | 1800 / min |
| Surface Finish | Glossy / Matt/Satin/Hair line |
| Voltage | 380V-50HZ |
| Weight | 1500 Kgs |
| Country of Origin | Made in India |
Product Details:
| Production Capacity | 1-3 ton/day |
| Power Consumption | 19.50 HP |
| Machine Type | Fully Automatic |
| Job Thickness | 1-2 mm |
| System Control | PLC with HMI Touch screen |
| Max Sheet Width | 400-600 mm |
| Machine Body Material | MS with powder coating |
| Phase | 3 Phase power |
| Motor | ABB company ABB motor |
| Surface Finish | Glossy, Matt, Hairline, Silver Satin |
| Country of Origin | Made in India |
Product Details:
| Production Capacity | 1-3 ton/day |
| Power Consumption | 19.50 HP |
| Machine Type | Fully Automatic |
| Job Thickness | 1-2 mm |
| System Control | PLC with HMI Touch screen |
| Max Sheet Width | 400-600 mm |
| Machine Body Material | MS with powder coating |
| Phase | 3 Phase power |
| Motor | 15HP (1nos) ABB company |
| Surface Finish | Glossy, Matt, Hairline, Silver Satin, Brushing |
| Voltage | 380V-50HZ |
| Country of Origin | Made in India |
Additional Information:
Product Details:
| Production Capacity | 1-3 ton/day |
| Machine Type | Fully Automatic |
| Job Thickness | 1-2 mm |
| System Control | PLC |
| Max Sheet Width | 400-600 mm |
| Machine Body Material | Gray |
| Phase | 3 Phase |
| Motor | 15 hp (1nos) ABB company |
| Voltage | 380v-50hz |
| Penal | Delta |
| Machine Dimensions | H(2000mm) x L(4100mm)x W(1800mm) |
| Work table size | 600mmx1220mm |
| Servo Motor | 1.5 Kw (2nos) Yaskawa company |
| Operating system | HMI touch operating screen |
| Polishing Consumable | Hemp wheel, nylon wheel, cloth wheel & flap wheel |
| Country of Origin | Made in India |
Additional Information:
Product Details:
| Machine Type | Fully Automatic |
| Motor | 15 hp (1nos) ABB company |
| Voltage | 380v-50hz |
| Polishing Consumable | Hemp wheel, nylon wheel, cloth wheel & flap wheel |
| Work table size | 600mmx1220mm |
| Operating system | HMI touch operating screen |
| Penal | Delta PLC |
| Machine Dimensions | H(2000mm) x L(4100mm)x W(1800mm) |
| Servo Motor | 1.5 Kw (2nos) Yaskawa company |
| Country of Origin | Made in India |
Additional Information:
Product Details:
| Polishing Consumable | Hemp wheel, nylon wheel, cloth wheel & flap wheel |
| Machine Dimensions | H(2000mm) x L(4100mm)x W(1800mm) |
| Operating system | HMI touch operating screen |
| Penal | Delta PLC |
| Machine type | CNC |
| Work table size | 600mmx1220mm |
| Servo Motor | 1.5 Kw (2nos) Yaskawa company |
| Voltage | 380v-50hz |
| Main Motor | 15 hp (1nos) ABB company |
| Country of Origin | Made in India |
Additional Information: